Imagine that the sun just set, your kids are doing their homework and you are preparing food to sell at market tomorrow. And then your lights go out. In remote communities using off-grid power systems, these types of service interruptions during peak hours are still common. This initiative will develop open source technology that makes renewable energy micro-grids smarter and more reliable. And we need your help to make it happen.
Green Empowerment works with regional partners SIBAT and TONIBUNG to build renewable energy micro-grids with remote indigenous communities in Southeast Asia.
In the last three years we have collaborated to design an open source Electronic Load Controller (ELC) that maintains micro-hydro system parameters whilst demand changes throughout the day - minimizing power overloads during off-peak hours. This open source technology has already allowed local engineers, manufacturers, and technicians to offer more resilient, lower cost solutions to meet energy needs.
Now Green Empowerment needs your help to keep this kind of success going. With your support we can take this work further and design technology that will decrease power outages during peak-use hours and allow excess energy (generated in off-peak hours) to be put to productive use.
Frequently Asked Questions
A major challenge in building micro-grids is to size the power capacity to meet the demand requirements of community members, yet still be financially viable for the community as a whole. Since power demand fluctuates throughout the day with peak periods for home use in the morning and evening and limited demand during other times of the day, power systems are often designed to meet part of the peak community need and have extra capacity off-peak.
A major community development goal is to identify beneficial uses for power during off-peak hours. In run of the river systems (with no storage reservoir) power production is fixed and all power produced must be used for the system to remain stable. When power production is greater than demand excess power is sent to a ballast tank where the power is wasted through water heating. Green Empowerment and its partners have already developed an open source Electronic Load Controller (ELC) that automatically monitors and manages power delivery to the grid and ballast loads based on instantaneous power demand.
Our goal is to minimize service interruptions during peak use and increase the beneficial use of produced power by developing locally manufactured open source technology that automatically turns loads (ie appliances) on and off during the 24 hour power cycle each day.
While current market solutions exist, they are designed for either much larger systems or for single user configurations in developed countries which make them either too costly for or incompatible with micro-grid systems in the developing world.
In addition, a major benefit of creating an open source solution is that engineers and technicians can assemble these controllers locally. Local design and assembly increases the impact of the project through technology transfer and reinforces system sustainability by making local repairs more feasible.
Imagine your community invested two years of time and a large amount of money to construct a local micro-grid. A large part of the budget went to buying an off the shelf technology from a far-away country. A year later there is a power surge and this piece breaks. Your local technicians do not know how to fix it, and the way it works is proprietary. It will be expensive and take months to order a new part. If only local engineers had designed this part themselves using open source schematics. It could be fixed in a matter of hours, not only turning the lights back on, but also reinforcing community trust in the system.
Yes, while our work up to this point has focused on micro-hydro systems, the technology we are now looking to develop has the potential to improve the efficiency and reliability of micro-grids running on solar and other renewable technologies as well.
In addition our design strategy is modular making the technology adaptable to a variety of system configurations.
Because Green Empowerment works collaboratively with communities and local partner organizations, we are uniquely positioned to create solutions that fit the actual consumer need and take into account the local cultural and financial realities.
In addition, Green Empowerment and our regional partners Sibat and TONIBUNG have been operating in the community based renewable energy and appropriate technology sectors for many years and have considerable in-house staff experience. Together we have collaborated on numerous successful projects and have a solid record of high quality implementation. Our most recent and relevant R&D and capacity building project is the open source Electronic Load Controller (ELC) which has already been successfully piloted in seven communities.
The community based renewable energy systems we work with typically consist of one plant/point of power generation with a capacity in the range of 5-30KW serving communities of 50-1000+ people.
The term open source refers to something people can access, modify and share because its design is publicly accessible. Open source technology allows for communities and energy practitioners to
- build the technology for a much lower cost
- learn how to repair/maintain it themselves.
- Add new features and capabilities through collaboration with other energy developers
Green Empowerment will develop this technology collaboratively with practitioners working in indigenous communities in Malaysian Borneo and the Philippines. Our partners will have full access to the technology and development process. In addition we publish all design materials online which are freely accessible to all at www.elcwiki.info. Through this wiki other practitioners in the field can also build on and modify the designs and share their new solutions with the community at large.
A major benefit of more reliable grids is that they can support larger appliances that supplement and/or replace household work that is typically completed by women. Pounding rice into flour, processing other crops, and washing clothes can all be accomplished through modern appliances during off-peak hours by this open source load sharing technology. These appliances can free up time in women’s lives for other pursuits and/or starting small businesses based on their current skills and newly created time. There are many cultural and economic factors that affect whether this possibility can be realized, but access to electricity is a key component to creating the opportunity for change.
Partner Highlight: SIBAT
For over 30 years SIBAT has worked with indigenous communities in the Philippines to build micro-hydroelectric systems (MHP or Micro-Hydro-Powerplants). We have partnered with SIBAT for over a decade and they are one of our key collaborators in the Open Source Initiative.
How You Can Help:
Click Here To Donate
Sponsor: Talk to your company about sponsoring part of our upcoming project.
Learn: Open Source for Village Solutions Webinar, July 23rd, 6pm - 7pm PDT
Share: Tell your friends and colleagues about this project. Spread the word via email, Slack, or social media.